While the curriculum for most HVAC programs is very similar, the training can vary. One course may offer more hands-on training time while another more class time. To most HVAC students, hands-on training is where the knowledge and experience come from.
But, some students will disagree, as they believe you can learn more from textbooks. Whatever the case may be, finding the right school is the first task of building an HVAC career. To help point you in the right direction, a list of the top HVAC training schools and programs is listed in the article below.
Obtaining Special Certifications
An EPA license was mentioned. This is a special certification and one that you will need to work in the field. This is the license that allows you to directly work with refrigerants. This not only allows you to maintenance, repair, and dispose of HVAC appliances, but it affords you the right to buy refrigerant.
All technicians are going to be required to be certified through this program, which is referred to as the EPA or Environmental Protection Agency. That being said, there are four different EPA certifications that you can acquire. This means that there are 4 sections to the test. One is a basic section and the other three will specifically pertain to certain components and situations.
The first certification that you can get is the Type I certification. This one grants you the ability to work on small appliances. Type II is for high and very high-pressure appliances. Type III is for low and very low-pressure appliances. Type IV is basically universal, which means you qualify for all.
The tests are going to vary in length as well as difficulty and must be taken in person at a designated testing center. Type I, II, and III will each have 50 questions. 25 of these will cover EPA regulations and the other 25 will cover recycling procedures. The universal section of the test is 100 questions with a 25 question core covering general HVAC and refrigerant knowledge.
Know The Requirements In Advance
Certification can also be a tricky issue for HVAC techs. There are some states where individuals must be solely licensed before legally working on HVAC equipment. There are some states where individuals can work under other people’s licenses. Some states will even require on the job training.
Whatever the situation is, it’ll be much easier for you if you get certified in the state you plan to work, as this will make you more eligible for a paid position. For instance, if you know that you are going to get into HVAC straight out of high school, you might want to consider training or doing your schooling in the area where you plan on living.
To begin the entire process, you are going to need a high school diploma or GED. It can also help if you take basic math, science, and industrial arts classes, but these are not required. The next step in the process will be to find a community college that offers HVAC training or find a company that is willing to train you on the job. Once you find the right community college, you’ll likely how to register and enroll. If you do not apply for grants and funds, you’ll have to pay out of pocket for the expenses.
The general length of these courses can last anywhere from three months to over a year. During your time in the class, you’ll get a good basic understanding of the HVAC field and the basic components. You’ll also likely get an EPA license along with a Journeyman’s.
There might even be a state test that you’ll have to pass. If there is and when you pass it, you’ll have to take your proof down to the local Development Services Department where you can then apply to become a state-certified operator. The good thing is that once you have this license, you can literally work anywhere in the state.
HVAC School In Massachusetts 2024 – Finding A Good Match For Your Specific Needs
Massachusetts laws require HVAC technicians to be licensed with the state. This means you will need to graduate from an accredited HVAC program and pass the HVAC exam before obtaining your license.
Bay State School Of Technology
Bay State School of Technology at 225 Turnpike Street in Canton, Massachusetts has a state-of-the-art HVAC training facility. Students receive hands-on experience to build their HVAC and refrigeration skills. You must apply for admission in advance because this is a very popular program in Canton.
Bay State School of Technology is known for its ability to turn out knowledgeable graduates who are fully prepared to enter the workforce. Students are put in various situations where they must rely on their knowledge and skills to problem-solve malfunctions. In some situations, the students are paired up to install and repair heating and air conditioning equipment.
When you graduate from the Bay State School of Technology HVAC program, you will be ready to take the HVAC-R exam. Once you pass the exam, you will then enter the workforce as a new HVAC technician.
MTTI Education For Employment
MTTI, at 1241 Fall River Avenue in Seekonk, Massachusetts is a vocational and technical school. The institute has an HVAC-R program that is open to high school graduates, GED-holders, and adults. If you want to build your career in HVAC, you can start at MTTI. The staff will work with you to apply for financial aid for the upcoming semester.
The MTTI HVAC & Refrigeration Program lasts approximately 30 weeks. This is a 900-hour program that will require your full attention. Day and evening classes are available to all students. The program has recently been approved at the RI Department of Labor & Training for refrigeration and pipefitting.
New England Institute Of HVAC
The New England Institute of HVAC trains students in all aspects of heating and air conditioning systems. The courses are comprehensive so they will cover equipment installation and repair. This school is located in Lowell, Massachusetts. It is approved for veterans as well. The institute claims to offer the most thorough training courses in the HVAC industry. The curriculum spans over 13 weeks with classes taking place during February, July, and October. To get started, consumers will need to complete an application and that can be done on the school’s website.
Instructors with this school comprise of more than 40 years of experience in the industry. Also, this is a North American Technical Excellent organization and it is licensed by the Department of Public Safety for License Testing. All instructions have EPA Universal certifications and other licenses. The training program helps students prepare for the EPA certification test.
The Peterson School
Since it has several campuses, The Peterson School is equipped to serve many Massachusetts residents. You can attend campuses in Woburn, Westwood, and Worcester. It is important to understand that this school offers various courses related to the HVAC industry. For instance, you can take the HVACR Commercial & Industrial Refrigeration Prep course.
It is designed to help students learn more about the basics of commercial and industrial refrigeration. The course lasts for 15 weeks and includes 120 hours of work. The tuition for this course is $4,350. There are several other courses to take advantage of as well.
For instance, students can enroll in the HVAC Electric Code Prep course, HVACR Refrigeration Code Prep course, or the HVAC Controls and Energy Management program. Alternatively, you can take a combination of these classes. Either way, the school offers everything you need to enter and excel in this industry.
Southeastern Technical Institute
The Southeastern Technical Institute is located on Foundry Street in South Easton, Massachusetts. STI Tech offers various classes including HVAC with some of the alternatives being culinary arts, dental assisting, and practical nurse training.
The institute is accredited by the Commission of the Council on Occupational Education. The Heating, Ventilation, Air Conditioning, and Refrigeration Program will span over 9 months and it ensures that graduates are ready to enter the field of environmental control. During your enrollment, you’ll be able to acquire the Section 608 EPA Certification and the R410 Safety Certification.
You can also use the course to obtain 150 hours toward your Sheet Metal Apprenticeship. This course is a good option for Massachusetts State Oil Burners Licensure Apprentices and Refrigeration Technician Licensure Apprentices too. The school has a job placement rate of 70% so there is a good chance that you’ll be able to get a job after graduation. Some of the most common employment opportunities from this course include repair and maintenance, sales and replacement, and installation of systems.
Porter And Chester Institute
The HVACR training program from the Porter and Chester Institute delivers hands-on training for heating, ventilation, air conditioning, and refrigeration. The training program can be completed in a minimum of one year. Participants will be prepared to enter this growing career field. The course is designed to prepare students to become skilled HVAC/R workers by providing them with the skills needed to install, maintain, and troubleshoot heating and air conditioning equipment. And, you’ll learn how to perform these tasks in commercial, residential, and industrial settings.
The school is home to qualified instructors who know how to teach. And, they understand the problems that you’re going to encounter on the job. Their experience will help you get ready for your future career. The school offers career training programs in Connecticut and Massachusetts with three locations in the latter. For instance, students can attend HVAC training programs in Canton, Chicopee, and Worcester.
Bristol-Plymouth Regional Technical School
Maryland is home to many great technical schools. Many will argue that the Bristol-Plymouth Regional Technical School or BP Tech is the best. BP Tech offers a post-secondary HVAC/R training program and it is Chapter 74 approved by the Massachusetts Department of Elementary and Secondary Education. Once you’ve completed the course, you’ll be ready to acquire industry credentials through testing and education. Simultaneously, students will be able to find jobs in a wide assortment of areas. Those who intend to keep working can enroll in the part-time evening program. It lasts nine months during one school year with classes starting in September of each year.
Students must attend class four evenings each week. Classes last from 4 PM to 9 PM and students will complete 650 hours of work when they’ve finished. This school is located on Hart Street in Taunton, Massachusetts.
Quinsigamond Community College
The Quinsigamond Community College campus is located in Worcester. It offers various training programs with its HVAC course being one of its most popular. The program is designed to cater to the precise needs of the student since 50% of more of the class can be completed online. Also, students can complete the course in a blended format meaning they can attend classes in person and online. Another benefit of this school is the fact that class enrollment is limited to 16 students. This means that class sizes are going to be restricted and you can receive more personal training.
Depending on the semester, you will either attend QCC classes at the Worcester Technical High School or the Assabet Valley Regional Technical High School.
Read also: Best HVAC schools in Maryland.